Coolant Flush and Replace

[bandit]

Yes & yes on both questions, when refilling pour coolant in first then distilled water (dont use tap water as can cause scale like your kettle)very slowly into the filler cap under tank to the very top refit cap,then fill exspansion tank to full mark, run the bike to allow coolant to circulate then switch off &let the bike go cold then remove the fuel tank again & topup filler cap if needed to the very top, put bike back to gether again & topup exspansion tank if required.P.S using the red coolant O.A.T last longer in service 5yrs compared to traditional stuff which is 2yrs.