29-03-13, 10:24 PM
(This post was last modified: 29-03-13, 10:32 PM by dBfazer600.)
Noggy, I simply traced where the pipe went to from the reservoir and disconnected it and threaded it back through the bike and drained. I did that much I could have got it wrong on the earlier post.
Their is also a plastic clip on the frame it ran through which I could not get back on so I used a tie to secure it in place after refitting. So if you can do not pull the clip out if you can thread it through. I am unsure if its possible.
Daz
Ps Yes it is the pipe that goes to the filler cap as over flow.
Their is also a plastic clip on the frame it ran through which I could not get back on so I used a tie to secure it in place after refitting. So if you can do not pull the clip out if you can thread it through. I am unsure if its possible.
Daz
Ps Yes it is the pipe that goes to the filler cap as over flow.
She Ain't Exactly Pretty, She Ain't Exactly Small, Fourt'two Thirt'ninefiftysix
You Could Say She's Got It All.
You Could Say She's Got It All.