26-03-13, 09:07 AM
(26-03-13, 01:55 AM)Yamazer-92 link Wrote: Hi guys, been noticing a rattle on my bike every now again when pulling away at low revs. It's a loud metallic sound that I can't quite pinpoint but it's on the left,
Next time the rattle occurs, pull in the clutch. If the rattle goes away then it's normal. Balancing the carbs will help to minimize this sound/rattle. It might also help your dip in the idle. You could run the additive that I used too, which might help in case there is anything sticky in the carbs. Use the maximum strength STP on in my thread here........
http://foc-u.co.uk/index.php/topic,6805.0.html
After getting the carbs balanced, it would be no harm to check your TPS on the throttle body right hand side. Turn ignition off and pull out the lead to the TPS. Turn bike back on and plug lead back in while on. On the rev counter you will get one of three setting.... 0rpm, 5000rpm, or 10,000rpm. It should be at 5000rpm. If it is at the other two postions you will need to open those two security thread and position the TPS until it reads 5000rpm.
Best of luck.