|
Carb Mixture Screws
|
21-03-13, 12:53 AM
I got a cheap screwdriver kit for watches/glasses ect. Instead of angling it which would be impossible as it would snap, I just hacked it in half. I marked one side with tipex so I could see how many turns I was doing. It had a grooved handle with a good grip so it worked a treat. Here is the size both close up and at a distance........
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Carb Mixture Screws - by Dead Eye - 20-03-13, 07:05 PM
Re: Carb Mixture Screws - by reillypadraig - 21-03-13, 12:14 AM
Re: Carb Mixture Screws - by unfazed - 21-03-13, 12:41 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 12:42 AM
Re: Carb Mixture Screws - by packie - 21-03-13, 12:53 AM
Re: Carb Mixture Screws - by Chris - 21-03-13, 12:55 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 12:55 AM
Re: Carb Mixture Screws - by packie - 21-03-13, 12:56 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 12:56 AM
Re: Carb Mixture Screws - by Chris - 21-03-13, 12:58 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 12:58 AM
Re: Carb Mixture Screws - by packie - 21-03-13, 12:59 AM
Re: Carb Mixture Screws - by Chris - 21-03-13, 01:04 AM
Re: Carb Mixture Screws - by unfazed - 21-03-13, 01:34 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 01:41 AM
Re: Carb Mixture Screws - by unfazed - 21-03-13, 02:06 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 02:53 AM
Re: Carb Mixture Screws - by packie - 21-03-13, 10:01 AM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 02:04 PM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 06:13 PM
Re: Carb Mixture Screws - by Chris - 21-03-13, 06:26 PM
Re: Carb Mixture Screws - by Dead Eye - 21-03-13, 06:40 PM
Re: Carb Mixture Screws - by Dead Eye - 08-04-13, 01:03 PM
Re: Carb Mixture Screws - by red98 - 08-04-13, 01:18 PM
Re: Carb Mixture Screws - by Dead Eye - 08-04-13, 01:49 PM
Re: Carb Mixture Screws - by red98 - 08-04-13, 02:44 PM
Re: Carb Mixture Screws - by Dead Eye - 08-04-13, 08:07 PM
Re: Carb Mixture Screws - by Torque - 16-03-14, 01:09 PM
Re: Carb Mixture Screws - by red98 - 16-03-14, 02:48 PM
Re: Carb Mixture Screws - by Torque - 22-03-14, 10:35 PM
|
