16-03-13, 01:11 AM
(15-03-13, 10:55 PM)dickturpin link Wrote: mintex cera-tec grease is recommended for slider pins and back of new pads...(google it)
pump handbrake to reset it when job done, not the pedal.
I think wd40 is not good for seals, try cera-tec or red rubber grease for that.
that's the advice for my cage which also has wind back pistons in the rear calipers.
D
Sorry should have explained better. most cars I have done have a moving dust seal that rises up along with the piston. I completely agree do not put WD40 on the main piston pressure seal itself if you do not have one.
In all honesty if you do have one and see it twisting around stop and loosen it because as I said before I have seen cars with ripped ones due to it twisting around.
As for lubrication, nowt wrong with copper slip :lol
Lord,
Grant me the WD-40 to move those things that are stuck, the Duck tape to fasten those things that are loose, And the wisdom to know the difference.
Amen
Grant me the WD-40 to move those things that are stuck, the Duck tape to fasten those things that are loose, And the wisdom to know the difference.
Amen