(01-03-13, 05:24 PM)Rolfieh link Wrote: Can anyone please describe the route please.Yup
With the petrol tank off> starting from the exup servo the cables from left to right> then flush along the right hand frame rail> then down the back of the right hand side of the airbox cover (the one with the 3 bolts> then down the back of the engine between it and the frame/swingarm> then through a small metal loop thats welded to the frame> then connect the ends of the cable to the exup valve pulley.
Take care to make sure through out the routing process not to cross over the cables, this will make the final connection to the pulley much less problematic.
http://www.cartestsoftware.com/fz1/lubricatecables.html
http://www.kappabikes.info/yamaha-fazer-...uting.html