09-02-13, 10:16 PM
Remove the rubber bung on the sprocket cover and you will see a 10mm lnut and a slotted bolt end for a screwdriver.
Loosen the nut, it will give a weird sound when it gives and then use a screwdriver to adjust it. You will need to turn it anticlockwise to slacken it.
When you have about 10mm freeplay at the lever tighten it up again and take up the final slack with the adjuster at the lever.
Loosen the nut, it will give a weird sound when it gives and then use a screwdriver to adjust it. You will need to turn it anticlockwise to slacken it.
When you have about 10mm freeplay at the lever tighten it up again and take up the final slack with the adjuster at the lever.