07-02-13, 07:07 PM
Exup nut
If I remember the bolts are M6 socket heads and 10mm long with a washer under each one.
I think I removed old bolts and measured them before ordering, the housing bolts may need to be slightly shorter as they screw through and just catch the casting of the exhaust section, so be careful before fully tightening up.
I got my bolts from Stagonset online.
Best advice is to measure bolts up and take into account , washers under heads as socket head bolts aren't the same as originals that have a hex head and combined washer on them . Hope this helps
If I remember the bolts are M6 socket heads and 10mm long with a washer under each one.
I think I removed old bolts and measured them before ordering, the housing bolts may need to be slightly shorter as they screw through and just catch the casting of the exhaust section, so be careful before fully tightening up.
I got my bolts from Stagonset online.
Best advice is to measure bolts up and take into account , washers under heads as socket head bolts aren't the same as originals that have a hex head and combined washer on them . Hope this helps