Gearbox "Shunt"

[alexanderfitu]

If the chains adjusted correctly, only two things I can think of:
Check the rear wheel doesn't move at all (as in from side to side, or front to back physically). Basically that the bearings are fine, and the spindle is done up properly with the adjusters both the same.
Check the rod the front sprocket nut bolts onto, and make sure there's no play in it at all.

No play in the rear wheel bearings or swingarm bearins, all bolts done up correctly


I havent checked for any lateral play in the output shaft, so will check that soon. Thanks.