07-02-13, 02:19 AM
If the chains adjusted correctly, only two things I can think of:
Check the rear wheel doesn't move at all (as in from side to side, or front to back physically). Basically that the bearings are fine, and the spindle is done up properly with the adjusters both the same.
Check the rod the front sprocket nut bolts onto, and make sure there's no play in it at all.
Check the rear wheel doesn't move at all (as in from side to side, or front to back physically). Basically that the bearings are fine, and the spindle is done up properly with the adjusters both the same.
Check the rod the front sprocket nut bolts onto, and make sure there's no play in it at all.