what a mess....help plz?

[packie]

I should know after today if I need new ones, getting pissed of at this stage,

I seen the rear master cylinder on the site but only saw front calipers.

I have heard this argument before about the trx850 and also the 2005 fz1 fits  :eek with a little bit of fiddeling.

Is the trx850 a direct bolt on job??

I have something that may/may not help you out. I have a rear calliper that I don't think is seized, but some clown sheared one of the bleed nipples. I have brake pads for them too. I tried drilling out but no luck so you could drill a larger hole and maybe source or get a larger bleed nipple made up. I also have a master cylinder but again, some clown either cut off or sheared some of the thread on the adjusting bolts. It works, but your brake pedal will be a bit high. You can have both free...just cover the post which would cost about €10. You can send me a private message if you are interested.

I replaced both myself. I'm using a Fazer 1000 caliper. Just a little filing to the bracket (or caliper) and it fits perfect. If you want a perfect master cylinder, there are loads about...the caliper will be more tricky to get both the original and a substitute.
Cheers,
Pakie.