04-01-13, 09:51 PM
Hi,
I would like a little help, please.
My meta 357tv2 alarm which was fitted with the bike brand new in 2003, has stopped working.
I have the red key card with the 2 codes.
[color=rgb(34, 34, 34)]It looks to be completely shut down no led, indicators do not flash, no beeps nothing. If I disconnect the battery
when reconnect it still doesn't work. The bike has been on an optimate in the garage all over the Christmas period.
The alarm has probably gone into sleep mode but it will not wake up.One thing I did check the fuse all ok, but when I reconnect the fuse the alarm sounder makes a crackle noise. I can only assume the internal battery is low.
Can I measure this voltage from the fuse connector to ground. Could the connector onto the alarm have corroded contacts it is mounted under the tail light bracket.
The connector onto the alarm has what looks like security screws is there two.
What are my options,
. I need first to try and get the alarm working or bypassed so I can get it replaced or fixed if it's a corroded connector.
Does anyone have the bypass pin out diagram for the connector so I can bypass.
One other note: The fob batteries are the original not had any problems ever. But aside from the alarm if I changethe fob battery will the fob still be recognised by the alarm.
[/color]
I would like a little help, please.
My meta 357tv2 alarm which was fitted with the bike brand new in 2003, has stopped working.
I have the red key card with the 2 codes.
[color=rgb(34, 34, 34)]It looks to be completely shut down no led, indicators do not flash, no beeps nothing. If I disconnect the battery
when reconnect it still doesn't work. The bike has been on an optimate in the garage all over the Christmas period.
The alarm has probably gone into sleep mode but it will not wake up.One thing I did check the fuse all ok, but when I reconnect the fuse the alarm sounder makes a crackle noise. I can only assume the internal battery is low.
Can I measure this voltage from the fuse connector to ground. Could the connector onto the alarm have corroded contacts it is mounted under the tail light bracket.
The connector onto the alarm has what looks like security screws is there two.
What are my options,
. I need first to try and get the alarm working or bypassed so I can get it replaced or fixed if it's a corroded connector.Does anyone have the bypass pin out diagram for the connector so I can bypass.
One other note: The fob batteries are the original not had any problems ever. But aside from the alarm if I changethe fob battery will the fob still be recognised by the alarm.
[/color]