Square to Foxeye Fairing Mod

[davec]

I've started to put it all together now,still waiting on a couple of bits. I've snipped the wires on the original harness close up to the bulb on the side light and will be connecting the mk 2 side light wires  into the harness with spade connectors,they will obviously go from the 2 wires on the side light side into 1 wire on the harness side.I will keep the original headlight block on the left hand side and just tuck it away.                                                                                                                                                                                        I was wondering whether it was possible to put the relays further back on the bike, like under the seat or near to the flasher relay,as there is more room, and run the wires up to the headlights or do they need to sit close to the headlight unit?                                  Also did you choose a 40 amp relay for a reason or could you have used a 30 amp?I'm asking this purely out of interest as to how you came to to choose the 40 amp. Thanks for the pictures having gone over everything I understand how it all works and it now makes sense. Eurika!I'm just trying to fine tune it now.