Square to Foxeye Fairing Mod

[limax2]

Finally got round to having a look at the other Fazer. Not much to add to what has already been said but a couple of things I noticed.
1) The original left headlight socket, which is no longer used, I left attached to the harness and insulated it with a rubber sleeve and tucked it behind the clocks. You could snip it off and insulate the wires, but from working on classic bikes I have a thing about being able to put things back to standard spec. No other reason  :\ .
2)I seem to have used the original Mk1 pilot bulb holder (black) on the R.H. side and a Mk2 holder (grey) on the left. I have connected the wires from the Mk2 holder to the wires from the Mk1 holder at the plug end of those wires. (Although the holders are different the fitting into the light unit must be the same). On the photo below you can see the black socket on the main harness and the white plug with black tape round it where I made the connection. It's probably easier to snip the socket of and use a connector block as you said, but again I didn't want to alter the original harness.
For good measure another view of the relays as well.