Square to Foxeye Fairing Mod

[limax2]

Looking at the photo with the relays and lots of wires, I seem to have used some sort of socket to connect to some of the relay terminals?? Don't let that confuse you as it was probably something I had in my box

Just realised that that socket is the original main beam light socket which must have fitted the relay terminals number 86 and 85. I think I must have cut off the redundant plastic bit that would normaly be used with a twin fillament bulb, but not used on a standard Mk1 Fazer light. Very handy that as the feed and earth wires that would normally control the main beam will now control the main beam relay instead.
Hope that makes sence.
On the live feed connect to the battery + with a ring (eyelet) terminal and a short length of wire to the line fuse.
A steep learning curve if you are not used to dealing with bike electrics, but as long as you take your time and double check before finally connecting to the battery you will be fine  :thumbup