25-11-12, 04:31 PM
Here are the photo's of the fairing mounting brackets I made on the bike. Having looked at my mk1 I now see there are two mountings for the fairing on each side welded to the frame. These are the one's I used, not the horn mounting bracket that I mentioned earlier. The strip material I used for the make up brackets was 16mm x 2.5mm mild steel. (Recycled Upvc door looks, scrap metal to most locksmiths 
). These brackets then provided the rear mounting points for the Mk2 fairing rear brackets and also for the two relays. With the fairing and inner panels in place the relays and wiring are covered and hidden from view. Heat shrink tubing is good for making a neater job of the new wiring. Along with the relays it is available from Maplin and other places.
). These brackets then provided the rear mounting points for the Mk2 fairing rear brackets and also for the two relays. With the fairing and inner panels in place the relays and wiring are covered and hidden from view. Heat shrink tubing is good for making a neater job of the new wiring. Along with the relays it is available from Maplin and other places.