25-11-12, 01:05 PM
As there are only a few items involved here, the sidestand switch, the neutral switch the clutch lever switch and the starter cutout relay unit. You have ruled out the sidestand switch and you say the neutral light is working correctly then the two items left are the clutch lever switch and the starter cut out relay unit. The clutch lever switch and the neutral light switch over ride the sidestand switch. As it appears to have happened when you had the incident with the ignition switch it is possible you could have burned out the diode(s) in the starter cutout relay unit. Bypass the clutch switch, with the bike on the centre stand and in neutrtal drop down the side stand, if it cuts out then replace the starter cut out relay unit. Before you replace anything check all the connections are clean including the alarm bypass connectors under the seat.