22-11-12, 11:25 PM
Yes Jacko, i have finished the 16 tooth fitting,
so now just to try it,, 37mm nut retaining the front cog,,borrowed a 38mm from my mates garage,and i had somehow the 32 mm for the rear wheel in my tool kit.
Yes it seems if you alter the breathing,in and out then you have to get a PC3 or 5 to adjust the fuelling or there is the o2 setup on the ecu.
Ideally you have to get it dynoed for the correct map but if you are not racing then there are plenty of maps written for your mods ready and very easily moved from your laptop to the power commander on the bike.
Billy
so now just to try it,, 37mm nut retaining the front cog,,borrowed a 38mm from my mates garage,and i had somehow the 32 mm for the rear wheel in my tool kit.
Yes it seems if you alter the breathing,in and out then you have to get a PC3 or 5 to adjust the fuelling or there is the o2 setup on the ecu.
Ideally you have to get it dynoed for the correct map but if you are not racing then there are plenty of maps written for your mods ready and very easily moved from your laptop to the power commander on the bike.
Billy
I know its only the internet but they are real people ! ain't they?