06-11-12, 10:58 PM
Dont forget about proper chain adjustment and alignment as well as the condition of the chain...
I measure from the swingarm pivot to the axle when aligning the chain, also make sure the axle is tight against the adjusters while tightening the axle bolt, i jam a bar between the chain and rear sprocket to take up any slack while tightening.
Also recheck the slack after tightening because the flex of the swingarm can alter your slack when its fully torqed up..
I measure from the swingarm pivot to the axle when aligning the chain, also make sure the axle is tight against the adjusters while tightening the axle bolt, i jam a bar between the chain and rear sprocket to take up any slack while tightening.
Also recheck the slack after tightening because the flex of the swingarm can alter your slack when its fully torqed up..