Picked up some bits to clean the carbs today and have been disassembling them. Unfortunately I can't undo the screws for three of the diaphrams :'( I was hoping to clean the carb bodies as I had noticed one or two little bits of grit (though these could have been my fault when I took the carbs off).
Obviously I can't use carb cleaner near the diaphrams as they will be destroyed but I did come across this home made ultrasonic bath (read down) - in this they used Tesco's Cola, would this be too harsh on the diaphrams? I've got all the parts for the bath so its definitely something I intend to try on the other bits and if it works well I'll feedback
Obviously I can't use carb cleaner near the diaphrams as they will be destroyed but I did come across this home made ultrasonic bath (read down) - in this they used Tesco's Cola, would this be too harsh on the diaphrams? I've got all the parts for the bath so its definitely something I intend to try on the other bits and if it works well I'll feedback
![[Image: 242673.png]](http://badges.fuelly.com/images/smallsig-uk/242673.png)
![[Image: 174802.png]](http://badges.fuelly.com/images/smallsig-uk/174802.png)