10-10-12, 05:05 PM
iv not done a fazer wheel bearing change but iv done loads of others but as a rule you can move the spacer across enuf (with a large screwdriver or similar) to be able to drift the bearing out,some carefully used heat(hot air gun or hot water orsimilar)near bearing will help expand the wheel slightly to aid removal(watch for burning paint,greese etc tho) when fitting new ones put bearings in freezer and warm wheel again and will again make muc easyer fitting,plenty but not too much grease on new bearings and smear on spindal to refit,buy good quality bearings and they will last a good while,id sugest because there not expensive to replace both bearings not just try and clean/grease your old ones ,ebay as well as your local bearing shop do them at great prices