07-09-12, 02:34 PM
Thanks - I'm not getting anything through to the master cylinder - so when i remove the banjo bolt from the top of the mater cylinder,i look down and it's empty - despite all that pumping....
The fluid doesn't seem to be making it from the resevoir under the back seat into the cylinder. When I first filled the resevior after linking it all up, it gave off a good few bubbles - but only enough to show that the fluid has made it as far as the joint of the vertical hose to the clyinder and no further.....
I'm thinking dud master cylinder - but before I installed it I gave it a good once over and it seemed fine.
Is this a common problem?
The fluid doesn't seem to be making it from the resevoir under the back seat into the cylinder. When I first filled the resevior after linking it all up, it gave off a good few bubbles - but only enough to show that the fluid has made it as far as the joint of the vertical hose to the clyinder and no further.....
I'm thinking dud master cylinder - but before I installed it I gave it a good once over and it seemed fine.
Is this a common problem?
See you on the A3...