Here you go a pic of the plug from a 357t-v2, pretty easy really once you have removed the plug at the back of the alarm unit (I snipped the bolts of the shroud with a pair of split pin cutters).
The 4 wires you need to bridge are both of the wires in the white plug (starter circuit) and two in the main plug on the top row (where the tang is that locks the connector) looking at it as though it is plugged in, you should count in from the right then they are the 2nd in & 4th in (see pic below)
Obviously you will need to isolated all the other wires as there are two lives +indicator wires which will be live when switched on.
![[Image: P1130446.jpg]](http://i32.photobucket.com/albums/d24/BOSOZOKU-1/Alarm%20Pics/P1130446.jpg)
If you dont fancy doing this yourself or you have a DIFFERENT model of META alarm fitted then please feel free drop me a P.M and I can remove the alarm for you.
The 4 wires you need to bridge are both of the wires in the white plug (starter circuit) and two in the main plug on the top row (where the tang is that locks the connector) looking at it as though it is plugged in, you should count in from the right then they are the 2nd in & 4th in (see pic below)
Obviously you will need to isolated all the other wires as there are two lives +indicator wires which will be live when switched on.
If you dont fancy doing this yourself or you have a DIFFERENT model of META alarm fitted then please feel free drop me a P.M and I can remove the alarm for you.