13-08-12, 12:54 AM
Ok, here goes (these colours are for the later FZ6, so may not be identical, but should give you a starting point).
The Blue / Black wire is the dimmer (High / low beam) switch feed (it goes to a connector at which point its green between the headlight relay output contact and that connector).
Red / yellow is headlamp relay feed (coil feed and contact feed).
No idea what the blue wire is (there's a blue wire in mine which becomes blue / red and thats the tail light feed).
Have you heated grips on your bike (which may have been bodged in)?
Better still, have you a multimeter so you can tell what's live and when?
The Blue / Black wire is the dimmer (High / low beam) switch feed (it goes to a connector at which point its green between the headlight relay output contact and that connector).
Red / yellow is headlamp relay feed (coil feed and contact feed).
No idea what the blue wire is (there's a blue wire in mine which becomes blue / red and thats the tail light feed).
Have you heated grips on your bike (which may have been bodged in)?
Better still, have you a multimeter so you can tell what's live and when?