07-08-12, 06:55 PM
Due to me getting the 7g error message I decided to service my exup at the weekend and it looks like ive f*cked it up , when Id fitted it I turned the ignition on,no probs so I went for a ride a few miles down the road the 7g error comes up again , went home stripped it down and refit a couple of times to no avail.
When its all fitted it rotates so far then tightens up and on inspection when I held a straight edge to it its got a slight bevel from the back side bending up. I went to the Yam dealers in Chorley and spoke to a mechanic he told me if its bent its goosed throw it away,then said my best option was to throw it away take the cables of and seal the hole with a bolt,job done. I said as far as I was aware this would have an averse effect on the bikes performance he shrugged and said my options were all expensive.
Rang another dealer just to price a new valve £282+ vat Shit ! Any advice or better still reasonably priced spare valves would be most welcome
When its all fitted it rotates so far then tightens up and on inspection when I held a straight edge to it its got a slight bevel from the back side bending up. I went to the Yam dealers in Chorley and spoke to a mechanic he told me if its bent its goosed throw it away,then said my best option was to throw it away take the cables of and seal the hole with a bolt,job done. I said as far as I was aware this would have an averse effect on the bikes performance he shrugged and said my options were all expensive.
Rang another dealer just to price a new valve £282+ vat Shit ! Any advice or better still reasonably priced spare valves would be most welcome