Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
scotoiler / steering wobble
#10
(24-07-12, 10:40 AM)limax2 link Wrote: The wheel wobble issue has been mentioned before and if bearings etc are in order it's a case of keeping at least one hand on the handlebar. (Always a good idea anyway  Wink ). I think it tends to develop as the tyres wear and made worse with the front unloaded a bit, i.e. with luggage on the back etc. Lots of bikes do it. Worst I had was a 1974 Triumph Trident with worn tyres and luggage. Fitting new tyres curred it for a while.
I don't think the weeping fork seal has anything to do with it but worth checking that the level in there is still o.k. anyway.
I like my Scottoiler (single feed) and original chain is still good after 33k miles. It developed a fault in that it doesn't always shut off when parked up so I fitted a tap in the supply pipe. I don't always have this extra tap turned on if the chain looks oily enough and the weathers dry. If I forget to turn it off I get oil on the floor. I just use 20w/50 engine oil in it that I have no other use for.


cheers mate.


i've order the oiler, managed to find one on ebay for £70 with free delivery.will be fitting it as soon as it's delivered.


as to the wobble, you may have a point regarding the heavy loading. it didn't take much for the bike to rest on the rear wheel whilst on it's centre stand. I just need to wait till I've fitted the scotoiler and had a wee pottle about the back roads round swansea.
Reply


Messages In This Thread
Re: scotoiler / steering wobble - by SteveH41 - 23-07-12, 07:53 PM
Re: scotoiler / steering wobble - by Lazarus - 23-07-12, 07:59 PM
Re: scotoiler / steering wobble - by AdieR - 23-07-12, 09:04 PM
Re: scotoiler / steering wobble - by Pat - 23-07-12, 09:59 PM
Re: scotoiler / steering wobble - by limax2 - 24-07-12, 10:40 AM
Re: scotoiler / steering wobble - by Jamieg285 - 24-07-12, 12:48 PM
Re: scotoiler / steering wobble - by rufus t glasgow - 24-07-12, 06:23 PM

Forum Jump:


Users browsing this thread: