11-07-12, 12:30 AM
I had the same problem ... H4 Hid on the right (bright white) an the old H1 halogen on the left.
Solved it by buying an H1 HID from Singapore on Ebay but be warned - its probably not going to be a direct fit. There is a bulb-carrier on the left and you'll need to
figure out some way of holding the HID capsule in place so that its leads can connect to the ballast.
I used 15 layers of hi temp plastic from ready-meal oven containers. All cut to the same shape as the original bulb-holder but with a big hole in the middle. It was a bit fiddly but it works fine.
Solved it by buying an H1 HID from Singapore on Ebay but be warned - its probably not going to be a direct fit. There is a bulb-carrier on the left and you'll need to
figure out some way of holding the HID capsule in place so that its leads can connect to the ballast.
I used 15 layers of hi temp plastic from ready-meal oven containers. All cut to the same shape as the original bulb-holder but with a big hole in the middle. It was a bit fiddly but it works fine.