29-06-12, 10:54 PM
If you need it the NGK cap part number is SD05F and it is a straight one. There is an NGK angled cap but according to somewhere on this site it is to short for the FZS600.
I would have a look to make sure the cold start plunger things on the carbs are all sliding in freely. By that I mean the things that move at the carb end when you operate the so called choke lever.
The fan on these doesn't usually cut in unless you are stationery for quite a while so I would check the coolant level anyway. Both at the thermostat housing and the plastic tank.
I would have a look to make sure the cold start plunger things on the carbs are all sliding in freely. By that I mean the things that move at the carb end when you operate the so called choke lever.
The fan on these doesn't usually cut in unless you are stationery for quite a while so I would check the coolant level anyway. Both at the thermostat housing and the plastic tank.