Fitting a Digi Gear on a Fazer 8

[FazerPete]

Would you Adam and Eve it!  Looks like been given the green light from Scorpion (see below).  I will update you on how I get on in the next few weeks.
Cheers
Pete
 
"Looks good to me Peter according to what you have sent it should be ok
Regards
Tony
Scorpion Automotive Ltd
Tel:    +44 (0)1257 249928
Fax:    +44 (0)1257 249938
Email: tony@scorpionauto.com
www.scorpionauto.com
Disclaimer: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe that you may have received this communication in error, please reply to the sender indicating that fact and delete the copy you received. In addition, if you are not the intended recipient, you should not print, copy, retransmit, disseminate, or otherwise use the information contained in this communication.
-----Original Message-----
Sent: 14 June 2012 15:01
To: Scorpion Automotive
Subject: RE: Contact from datatool website
Hi
At last I managed to track down wiring circuit diagram for the 2010 Fazer 8.  I have managed to deduce the following:
Digi Colour Black to FZ8 Black - Earth
Digi Colour Red to FZ8 Red/Green - Live
Digi Colour Yellow to FZ8 Red/White - Tachometer (Rev counter)
Digi Colour Green to FZ8 Yellow/Blue - Speedo
Digi Colour Brown to FZ8 Blue/White - Neutral
Digi Colour Orange - not connected
From the attached would you agree?
Thanks
Peter"