04-05-12, 08:21 PM
I need to re-align my forks, they really need it, so I looked at the link but as the first posterer inferred the method isn't explained very well
ie
'With the front off the ground and the axle troqued to spec, but with the pinch bolts loose,.... 1.Push the pinch bolt side in and let it spring back. Measure this distance. 2.Now pull it out and let it spring back. Measure this distance. 3. Split the difference to center the fork legs and clamp (tighten) the pinch bolts.'
'Push in' - 'pull out'? what distance? and between what and where?
Could someone explain it a bit better please!
ie
'With the front off the ground and the axle troqued to spec, but with the pinch bolts loose,.... 1.Push the pinch bolt side in and let it spring back. Measure this distance. 2.Now pull it out and let it spring back. Measure this distance. 3. Split the difference to center the fork legs and clamp (tighten) the pinch bolts.'
'Push in' - 'pull out'? what distance? and between what and where?
Could someone explain it a bit better please!