16-04-12, 08:54 PM
ok went to see my spanner man today,had a little chat and he suggests checking the pick-up coil he also gave me some yamaha tech data (very simular to haynes and handy to have ) in the haynes it says to check the pick-up coil you need to set your multi meter to ohms x 100 scale,i dont have that on my meter so checked it on the other settings..................2k...........0.204
20k.........0.21
200k.......00.2
if the coils good it should have a resistance between 189 to 231 ohms,anybody know how to convert the above figures ?
he also suggested to remove the datatool alarm,it was fitted when the bike was new so 14 yrs old now,turned out to be a cheap one with shock sensor and voltage drop to trigger it,removed now so something else to cross of the list
short test ride tells me the hole in the exhaust is getting bigger :\
20k.........0.21
200k.......00.2
if the coils good it should have a resistance between 189 to 231 ohms,anybody know how to convert the above figures ?
he also suggested to remove the datatool alarm,it was fitted when the bike was new so 14 yrs old now,turned out to be a cheap one with shock sensor and voltage drop to trigger it,removed now so something else to cross of the list
short test ride tells me the hole in the exhaust is getting bigger :\
One, is never going to be enough.....