14-04-12, 03:40 PM
So - just had it all apart. No sign of corrosion, damaged wires or water ingress. Wires both showed continuity all the way through and no leaks to earth (not that surprising because the speedo works a lot of the time). Put it all back together and its still there, so fiddling with it didn't accidentally cure a dodgy contact. No mechanical interference either - sorry Mike you had me hopeful for a while.
Should I snip and replace the wire(s), or just run a piggy back? Chitsu, I assume you mean run a wire from the multiplug under the infill and then split it taking one end to the CDI and the other to the sensor.
Should I snip and replace the wire(s), or just run a piggy back? Chitsu, I assume you mean run a wire from the multiplug under the infill and then split it taking one end to the CDI and the other to the sensor.
Nothing is foolproof to a sufficiently talented fool.