09-04-12, 11:04 AM
My OE on the Fazer600 had nowt holding it on, just chain tension and the cover.
When I replaced the OE sprocket on the thou, the tab washer was still in place, but the nut was not tight.
Loctite nut lock, torque it up, and hammer the tab down sweetly and it should be fine.
When I replaced the OE sprocket on the thou, the tab washer was still in place, but the nut was not tight.
Loctite nut lock, torque it up, and hammer the tab down sweetly and it should be fine.