21-03-12, 10:14 PM
If you have got indyspacers then take off the old indicators. Then make a sandwich of the indyspacers and the fairing. Slip the new indicator through the hole, add washer and nut, tighten securely. (Don't go mad tightening as you may rip the bolt out of the indicator). Connect the wiring and hey presto. Should the lights flash too fast, you will need to get a new flash can or load resistors to control the speed. By the way Brown /Green are the live side, black is earth. If you connect the wrong way round, the leds won't work Hope this helps.