16-03-12, 06:09 PM
is it a solid badge.....if so gentle prising evenly all round with a craft knife or small screw driver should get it off. to replace use specific double side sticky rubber or just a few blobs of a two pack glue.
if its a transfer .... buy new ones they will not go back on...to remove transfer/vinyl decal heat gently with hot air gun/haidryer pick with craft knife at 1 corner as flat as possible peel back on itself warming as you go do not just pull up it will just tear and means longer job
to apply new decal clean area and dry totally use a bit of masking tape to hold it where you want it imagine tape as a hinge dampen area with soapy water lift decal and start to peel backing off half way start to position decal and smooth move down smothing with dry cloth damp will allow you to reposition and will evaporate away
Brian
if its a transfer .... buy new ones they will not go back on...to remove transfer/vinyl decal heat gently with hot air gun/haidryer pick with craft knife at 1 corner as flat as possible peel back on itself warming as you go do not just pull up it will just tear and means longer job
to apply new decal clean area and dry totally use a bit of masking tape to hold it where you want it imagine tape as a hinge dampen area with soapy water lift decal and start to peel backing off half way start to position decal and smooth move down smothing with dry cloth damp will allow you to reposition and will evaporate away
Brian