11-03-12, 11:38 PM
Hey Justy..
I have the V8 version and fitted it 3 or 4 weeks ago without the speed healer... i run a 16t/47t setup... i used my phone with a GPS speedo app and it was well out so refitted with the resistor and orange wire and PCB cut then set up the version 8 by one of the very useful pages (Speedo output factor) .. value 1 = standard 16/44, then there are option covering many of the ratios.. 15/45, 15/47, 16/45, 16/46 etc... set mine to 0.95 (i think).. used my Phone app again now my speedo reads 1 mph over the true speed so.. when doing 60 on speedo .. true is 59... and it works right across the range... i also set the speedo in the V8 as well to the same value so when i am on the screen that display speed and max revs it show the true speed as well... awesome bit of kit
As said, if you running standard you do not need to solder in the orange wire or the resistor...
I love V8 it is so configureable... set it up exactly as you want it... Christian is a genius.. !!!
How to use instructions here...
http://cvieth.bplaced.net/MultiGauge%20U...%2080x.pdf