R6 forks (non USD) for Gen1

[blackcabbie]

ive been playing with this today and my solution which gets the wheel central between the forks is to insert a m22 washer on the "bolt" side.... left hand side when viewing from the front.... i think using your solution of tightening the pinch bolts on the hex socket side first to hold the axle fast and tightening the bolt on the axle could be a bit dodgy as this could have the effect of bending the fork leg inward to take up the play between the spacer and the fork leg.

maybe you have different size spacers on your bike......but my wheel and spacers are about 2mm narrower than the fork width...

also i have manadged to utilise the fazer mudguard with the aid of some hollow tube and longer screws on the front fixings , and short metal plates for the rear fixings.

thanks, i couldnt have done this or thought about it without your research.

cheers

dave