22-02-12, 12:57 PM
Not entirely correct.To set clutch at lower adjustment (pressure plate).Loosen completely at lever adjustment,remove lower bung,loosen locknut,adjust screw inwards, lightly ,until you feel pressure.then turn back anticlockwise 1/4 of a turn,tighten locknut and then adjust at lever.Make sure you leave some freeplay at the lever end or clutch will slip or worse.This is a very simple straight forward job,and Yamaha will do it no differently than your average biker.Most bikers should be able to adjust it for you in less than 5 mins.