30-01-12, 09:23 PM
The clutch adjuster at the engine end is behind the rubber bung on the outside of the sprocket cover. Quite possible that is the cause of the slipping clutch. There has to be a slight amount of free play there. Details of how to adjust it are on this site somewhere, may be in "Hot Poop".
The clutch push rod goes through an oil seal so a slight resistance is normal but should not be notchy but may feel a bit like that if it is dry. Try some oil on it.
The clutch push rod goes through an oil seal so a slight resistance is normal but should not be notchy but may feel a bit like that if it is dry. Try some oil on it.