24-01-12, 11:29 PM
This could be a few things: -
1. Dry chain
2. Misaligned wheels causing the chain to run out of line chain.
3. Tight spot caused by either of both of the above.
4. Loose front sprocket .
If (1) is allowed to go on long enough it will bugger the chain/sprockets and you get (3) if (2) is allowed to go on long enough you get (3) if bad enough (3) will spell the end of the chain/sprockets. (4) is not uncommon on early Fazers but very unusual on the injected normally caused by poor fitting.
1. Dry chain
2. Misaligned wheels causing the chain to run out of line chain.
3. Tight spot caused by either of both of the above.
4. Loose front sprocket .
If (1) is allowed to go on long enough it will bugger the chain/sprockets and you get (3) if (2) is allowed to go on long enough you get (3) if bad enough (3) will spell the end of the chain/sprockets. (4) is not uncommon on early Fazers but very unusual on the injected normally caused by poor fitting.
Later