20-01-12, 10:33 PM
I just found the shroud that I extracted from my "up at the right" headlight module.
Last time I tried pics on here I screwed up - so I'll use words.
There are 2 cutouts in the shroud. 1 each side.
If you look into the headlight as if you were standing in front of the bike a "non UK" shroud has cut-outs at both sides that taper to a point on an anti-clockwise direction
In the clockwise direction. One cutout ends as a rectangle and the other tapers but not very much.
I amagine that the UK version is a mirror image of that.
Last time I tried pics on here I screwed up - so I'll use words.
There are 2 cutouts in the shroud. 1 each side.
If you look into the headlight as if you were standing in front of the bike a "non UK" shroud has cut-outs at both sides that taper to a point on an anti-clockwise direction
In the clockwise direction. One cutout ends as a rectangle and the other tapers but not very much.
I amagine that the UK version is a mirror image of that.