20-01-12, 06:12 PM
On the Mk1 600 there is a slot in the fairing about 45mm long and 17mm wide, round at each end. (I can't remember if the fox eye Mk2 is the same.) Since the mirror form part of the fixing of the fairing you would need to make blanking plates with a bit of stiffness to them. I would suggest making some out of say 3mm thick aluminium plate about the size of the mirror base. Also cushion it with some thin rubber sheet, for example inner tube rubber or similar, so as not to start a crack in the fairing. Shouldn't be too difficult, but if you are struggling send me a pm and I'll knock a couple off for you.
I don't know of any that you can buy.
I don't know of any that you can buy.