19-01-12, 02:06 PM
Mike as ever is on the money.
The rod on the thermowax unit will be sticking.
Get the temp upto 75+, raise the tank and see if the plunger is pushing down on the throttle linkage.
If it isn't try wd40 and to physically move it.
It's not uncommon on the gen2 and is an easy fix.
The rod on the thermowax unit will be sticking.
Get the temp upto 75+, raise the tank and see if the plunger is pushing down on the throttle linkage.
If it isn't try wd40 and to physically move it.
It's not uncommon on the gen2 and is an easy fix.