06-01-12, 05:00 PM
Well, apart from the obvious or loosening off the switches, removing the left grip to allow the clutch perch to slide off and so on, if the pegs are still intact you can either
a. remove them and wrap the bars with a few turns of tape to secure the switches, or
b drill the bars once happy with the position.
It is unlikely you will need adhesive for the left grip to refit.
I would recommend nicer grips but that's my preference. Save for that, no, simples. You will notice a wider lower arm position and wonder how you ever rode with the standard monstrosities.
a. remove them and wrap the bars with a few turns of tape to secure the switches, or
b drill the bars once happy with the position.
It is unlikely you will need adhesive for the left grip to refit.
I would recommend nicer grips but that's my preference. Save for that, no, simples. You will notice a wider lower arm position and wonder how you ever rode with the standard monstrosities.