22-11-11, 10:21 PM
not that one, it's this one
https://buy.garmin.com/shop/alt-image.do...ImageLarge
On the top (RHS in the picture) there are two pins that lift and lower with the hinged top plate and engage with the holes in the casing of the unit. The two breakages have been a different pin each time, what's really puzzling is that there are lumps of the plastic boss that the pins run through missing too. I'm going to get my friend's Zumo round here and get the vernier on them both, see if there's any difference in dimensions, depth of hole etc. There must be a reason, particularly with the second mount I have been very careful when mounting/dismounting, and I always make sure the screw is so far out it is loose before removing the unit. Confused indeed. :\
https://buy.garmin.com/shop/alt-image.do...ImageLarge
On the top (RHS in the picture) there are two pins that lift and lower with the hinged top plate and engage with the holes in the casing of the unit. The two breakages have been a different pin each time, what's really puzzling is that there are lumps of the plastic boss that the pins run through missing too. I'm going to get my friend's Zumo round here and get the vernier on them both, see if there's any difference in dimensions, depth of hole etc. There must be a reason, particularly with the second mount I have been very careful when mounting/dismounting, and I always make sure the screw is so far out it is loose before removing the unit. Confused indeed. :\