23-10-11, 11:20 AM
Make sure the carbtune is vertical.
Make sure the hoses are connected to the vacuum points on the inlet rubbers securely.
Make sure there are no air leaks on the hoses.
If you still have to much damping then shorten the restricters (but remember, once you cut then you can't undo it).
Make sure the hoses are connected to the vacuum points on the inlet rubbers securely.
Make sure there are no air leaks on the hoses.
If you still have to much damping then shorten the restricters (but remember, once you cut then you can't undo it).