New Front pads time

[fazersharp]

So is it still a choice between

Galfer Brake Pads, Front, Semi Metal
Part No: FD178-G1054
https://www.ebay.co.uk/itm/186332692214?...SwCx9pju1p

Or these Galfer Sintered HH
https://www.ebay.co.uk/itm/144915796834?...Sw9ZFpjvin

OR
SBS HS Sinter Street Motorcycle Brake Pads

Fits Front Caliper
SBS-634-HS
https://www.demon-tweeks.com/uk/sbs-sint...bs-634-hs/

Thanks

[unfazed]

I have been using EBC sintered or Brembo sintered for the past 30 years and never had an issue with either of them.
Wouldn't Buy EBC discs though, had them two different bikes and had to take took them off as they did not work when cold and worse in wet cold..
Using Brembo discs ever since.

[fazersharp]

I have been using EBC sintered or Brembo sintered for the past 30 years and never had an issue with either of them.
Wouldn't Buy EBC discs though, had them two different bikes and had to take took them off as they did not work when cold and worse in wet cold..
Using Brembo discs ever since.

Thanks - the brembo ones seem harder to get hold of - after a very quick look.
Reading back through the forum the EBC ones always seem to be at the bottom of the favourite list

[unfazed]

I have been using EBC sintered or Brembo sintered for the past 30 years and never had an issue with either of them.
Wouldn't Buy EBC discs though, had them two different bikes and had to take took them off as they did not work when cold and worse in wet cold..
Using Brembo discs ever since.

Thanks - the brembo ones seem harder to get hold of - after a very quick look.
Reading back through the forum the EBC ones always seem to be at the bottom of the favourite list

Noticed that too but I find the HH ones excellent. I think the complaint was high wear level on the discs which I never noticed. My 600 discs were close to the wear limits at 70000miles but did not think it was to do with the EBC pads, but more down to use as I worked in the city and to many traffic lights 

[fazersharp]

I have been using EBC sintered or Brembo sintered for the past 30 years and never had an issue with either of them.
Wouldn't Buy EBC discs though, had them two different bikes and had to take took them off as they did not work when cold and worse in wet cold..
Using Brembo discs ever since.

Thanks - the brembo ones seem harder to get hold of - after a very quick look.
Reading back through the forum the EBC ones always seem to be at the bottom of the favourite list

Noticed that too but I find the HH ones excellent. I think the complaint was high wear level on the discs which I never noticed. My 600 discs were close to the wear limits at 70000miles but did not think it was to do with the EBC pads, but more down to use as I worked in the city and to many traffic lights 

On the wear issue and city riding and red lights - my thinking is that you would be lighter on the breaks because you just dont need them as much as you would if you spent your time flying around country lanes.