what did you do with your fazer today ?

[blackcabbie]

you need a resistor, diode and a push button....... all available from maplin..... christians multiguage site gives all the details....you have to splice into the temperature sensor wire

[tex]

Thanks, I'll have a look

[joebloggs]

Grinding, grinding and more grinding.

If you ever feel the need to fit flanged bolts/nuts to your top suspension mount, don't, just passable to grind the top weld that the stock bolt locates on but the lower one was a twat. One hour filing with a stroke of about 15mm is about as much fun as it sounds.

Removed the front sprocket with a electrical impact driver, to tight for socket and breaker bar. Had splined tab washer holding it on, is this stock?

[slappy]

Rode it up to Ribblehead and Hawes, thought I had took a nice couple of pictures of the viaduct and Pen Y Ghent but my memory card decided to foc up.

[flakey]

W O W
Fitted a mode button on rh handlebar to change view mode multi guage on my fazer 1000[/size][color=rgb(74, 74, 74)]https://goo.gl/photos/FAqWsNm5jVhdLGWd7[/color]Sent from my HUAWEI GRA-L09 using Tapatalk 2


now thats the cooolest thing ive ever seen on a fzs600, like it-like it alot :lol , wish I could afford one of them

[GH600]

Took mine down the runway twice at Henstridge on their biker blast http://www.bikersblast.com/ 

[esetest]

Rode the Fazer home the scenic route after the free training course on electric vehicle charging points , the tyre is now  scrubbed  in .

[esetest]

Took the Fazer this morning instead of the Guzzi  , rode it to Weymouth , stopped and had a coffee and dried off  , got soaked between Yeovil and Dorchester , then went onto Lyme Regis , stopped for another coffee , looked at the Map and decided to head for the Motorway as it was getting late, got soaked between Lyme regis and Honiton . Got as far as Taunton , then had to come off the M5 as it was blocked by the Police due to an accident , as Taunton looked snarled up with traffic headed towards Yeovil and rode home via Shepton Mallet and the Old Bristol Road , got home at 17.30  , just in time to get ready for my Night shift at the University .

[dazza]

Went for a little celebration ride in the sunshine but after the 5th vehicle pulled out in front of me,  had to stop and take a photo to see if I was invisible. :rolleyes

[nick crisp]

Went for a little celebration ride in the sunshine but after the 5th vehicle pulled out in front of me,  had to stop and take a photo to see if I was invisible. :rolleyes

D'you know, I think you are invisible! Oh wait...maybe you're just stood behind the big yellow bike  :lol

[fazersharp]

Went for a little celebration ride in the sunshine but after the 5th vehicle pulled out in front of me,  had to stop and take a photo to see if I was invisible. :rolleyes

I dont see any bike

[TOADY]

Today I fitted my akrapovic copy. Only ordered it last Sunday and arrived from Hong Kong today. Cook about van hour to fit and sounds bloody lovely

[NorthWestern]

Pics/report toady!!

Intentionally left blank

[NorthWestern]

Took it for an emergency mot after coming across my old mot by mistake and seeing it runs out tomorrow...

Intentionally left blank

[matt7chunk]

Today I fitted my akrapovic copy. Only ordered it last Sunday and arrived from Hong Kong today. Cook about van hour to fit and sounds bloody lovely

Where did you order the pipe from mate,  have you got a link? 


Sent from my GT-I9300 using Tapatalk

[dazza]

[quote author=dazza link=topic=6412.msg235270#msg235270 date=1466795273]
Went for a little celebration ride in the sunshine but after the 5th vehicle pulled out in front of me,  had to stop and take a photo to see if I was invisible. :rolleyes

D'you know, I think you are invisible! Oh wait...maybe you're just stood behind the big yellow bike  :lol
[/quote]
Don't know why it came out so big  :\

[quote author=dazza link=topic=6412.msg235270#msg235270 date=1466795273]
Went for a little celebration ride in the sunshine but after the 5th vehicle pulled out in front of me,  had to stop and take a photo to see if I was invisible. :rolleyes

I dont see any bike
[/quote]
:lol  This explains it

[brooker81]

Smashed in a 850 mile ride over the weekend. Got soaked.

[Shinigami]

fitted new chain and sprockets, cried when the cheap riveting tool was weaker than the soft rivet...


still need to rivet it XD

[Fazer99]

* Topped up the engine oil
* Lubed the Chain
* Properly repaired the broken wire from the reader to the speedo
* Took it out for a good hard Ride

Now I need to give the dirty girl a good wash  :rollin :lol :rollin

[dazza]

Swapped the bars out for some 758's. Got a local engineering company to tap the ends to accept the original bar end weights.
Feels a lot better, something I always noticed after riding my DRZ and that MT10.
Still toying with the idea to raise them an inch or not.