Exup's Boike Spruce-up! (Red made me post this)
|
Exup's Boike Spruce-up! (Red made me post this)
|
Cheers Christine......I'd like to keep the pipes and clean em up but just had the exup out and it rusted quite badly. Not sure wether to just remove or repair it....
![[Image: 9589ea77ad595974bd8cb9f70cc0aadc.jpg]](http://images.tapatalk-cdn.com/15/10/18/9589ea77ad595974bd8cb9f70cc0aadc.jpg) ![[Image: 50db90153c948c52d3a9801ac732d6c8.jpg]](http://images.tapatalk-cdn.com/15/10/18/50db90153c948c52d3a9801ac732d6c8.jpg) ![[Image: d07275312e2cf4a5c743b33fbff7ec59.jpg]](http://images.tapatalk-cdn.com/15/10/18/d07275312e2cf4a5c743b33fbff7ec59.jpg) ![[Image: 70b7ab0b47110c188bcaeedaacf3afff.jpg]](http://images.tapatalk-cdn.com/15/10/18/70b7ab0b47110c188bcaeedaacf3afff.jpg) OOOPS.... Can't get this off....tried heat....any ideas?? ![[Image: bcfc2404ccc3b0067d7562ace772832a.jpg]](http://images.tapatalk-cdn.com/15/10/18/bcfc2404ccc3b0067d7562ace772832a.jpg)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
Fuck.......got the pulley off (thanks Deadeye) but bent it trying to get the valve out..... What are my options ?????
![[Image: 9868825a7dee39101f0453da5eddd908.jpg]](http://images.tapatalk-cdn.com/15/10/18/9868825a7dee39101f0453da5eddd908.jpg) ![[Image: 736f8a588ce11ca2b17463509857c294.jpg]](http://images.tapatalk-cdn.com/15/10/18/736f8a588ce11ca2b17463509857c294.jpg) Do u think this was to big ?? ![[Image: e49f7ae44f73df47a0e0d7290f4d48fe.jpg]](http://images.tapatalk-cdn.com/15/10/18/e49f7ae44f73df47a0e0d7290f4d48fe.jpg)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
18-10-15, 03:47 PM
Good effort with the Lech....I got some outta lidl the other day quite nice...not as nice as Tyskie though....oh good work too
Easiest way to go fast........don't buy a blue bike
Found a little paraffin burner after a clear out and got that going for the winter.
![[Image: eb6e28d432997c03aedea4d5e41e311b.jpg]](http://images.tapatalk-cdn.com/15/10/19/eb6e28d432997c03aedea4d5e41e311b.jpg) ![[Image: 79233ca99b38d9c1cbc27c09612f64c0.jpg]](http://images.tapatalk-cdn.com/15/10/19/79233ca99b38d9c1cbc27c09612f64c0.jpg) We tried to straighten the valve out and although it went back together it wouldn't turn correctly when fitted ![[Image: d94f5cc1fe628dcc331762683abe07b2.jpg]](http://images.tapatalk-cdn.com/15/10/19/d94f5cc1fe628dcc331762683abe07b2.jpg)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
19-10-15, 09:14 AM
Also found the problem with the "choke cable"
![[Image: 2324960742222982ff3d39e34e12af60.jpg]](http://images.tapatalk-cdn.com/15/10/19/2324960742222982ff3d39e34e12af60.jpg) ![[Image: 1a7bcd5963257095b6f78c60ea082e1e.jpg]](http://images.tapatalk-cdn.com/15/10/19/1a7bcd5963257095b6f78c60ea082e1e.jpg)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
19-10-15, 09:29 AM
The pin runs through all 4 carbs internally and the end has snapped off.....it's either a pain in the arse to start or a free security mod lol
I will just clean the bike this week and think about where to go with this. I'm not sure how far to go considering it's only 18k. I am gonna keep the bike and probably strip it down around 60/70k so the work I do now shud make that easier. Not sure about the carb pin or wether to repair or remove the exup valve. Also I was thinking of having the rad off for good access to the header bolts. And possible respray/engine tidy without having the block out. I was thinking maybe get the stands out and spray them and under the bike with something that looks tidy and has protective elements. Advice appreciated If anyone has exup bits for sale let me know as that will help determine the first issue to solve.
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
19-10-15, 06:10 PM
Has the pin snapped or has the external circlip thingy gone missing?
19-10-15, 07:38 PM
The pin has snapped off
![[Image: b20c61a1e408f33bf4a42f6cca40fcf6.jpg]](http://images.tapatalk-cdn.com/15/10/19/b20c61a1e408f33bf4a42f6cca40fcf6.jpg)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
19-10-15, 11:31 PM
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
21-10-15, 04:21 PM
Should be just a case of removing and replacing.
Re swinging arm and chain. If your new chain is endless, put it on the swing arm before refitting.
Some say that he eats habanero chilli peppers dipped in oil of capsaicin for extra bite and that his pyjamas are made from Nomex. All we know is, he's called Ad the Bad
22-10-15, 09:59 PM
23-10-15, 08:43 PM
(19-10-15, 11:31 PM)Exupnut link Wrote: Has any body had any experience of fitting these ? Recently replaced these on my TDM and as b1k3rdude said be firm but gentle :lol . I ended up bending the head of a spanner so I could get a bit more grip on the plastic nut, still rounded one of the buggers off though :\ but got there in the end.
HURRAH!!!
Ordered 2 weeks ago and received today ![[Image: 742149e7940dbbdec24b881ac33a0030.jpg]](http://images.tapatalk-cdn.com/15/11/21/742149e7940dbbdec24b881ac33a0030.jpg)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
21-11-15, 03:39 PM
Bout time you posted :rolleyes.......you going to tell us what it is then ............
One, is never going to be enough.....
21-11-15, 06:31 PM
Mmmmmm..........didn't think it was long enough for that.........come on FUDNUT put the cheap polski lager down and spill the beans....
One, is never going to be enough.....
21-11-15, 06:39 PM
Looks like a genuine Yamaha cock ring custom made to fit exupnut's member
21-11-15, 07:57 PM
Three words....fuck....shit....bollocks....:-)
Just flapping about on this stagnant little pond on the outer rim of the internet.....yup.... :-))
21-11-15, 08:02 PM
Let me guess you bought the EXUP spacer instead of the bush :lol
|
|
« Next Oldest | Next Newest »
|
