what did you do with your fazer today ?

[pilgo]

stuck it back under both her covers as she's running rough,im guessing/hoping its just the K & N air filter that i fitted last week causing the engine to run rich/lean so ive ordered a genuine yamaha air filter and i'll fit that when i can next week  :\

good job i wasnt coming to meet ya nog for the fender,id of had to come in the cage and pay a deposit at the bridge to get out again!!  :lol

[Yamrider]

Rode it to cadwell park, had lunch, watched the trackday for a bit then rode home. 200 miles and 4 1/2 hrs saddle time. Life is good !!! (So was the weather!)

[carlos]

fitted some goodrigde hoses to the front brakes. with the hose going through the guide brackets on the forks it seemed to make the hoses crease when the suspension was compressed so just left them off does this matter??

[lew600fazer]

Met up with a guy from the Z1000SX forum , he was on his 2014 SX , my mate on his Honda Hornet 900 and me on my FZ6.
Fun ride from Guadalest down through the Jalon Valley on to Moraira(Costa Blanca 24 degrees) Bikers paridise.
Lew

[dickturpin]

New MOT......no advisories.... :woot :woot :woot

[risticuss]

Took all my brake pads off, gave them and the calipers a good clean, regreased and back together again. Replaced one of the pad pins in the rear caliper.... £9.65 each from the  local Yam man! Anyone know where to get them cheaper? The 03 screw in type?

Simon

[NorthWestern]

syphoned some petrol out of it to put in the lawn mower... rock 'n' roll!

[CRH]

syphoned some petrol out of it to put in the lawn mower... rock 'n' roll!

...lol"...dito :lol ...

[mickvp]

Bought it (pics to follow once I've cleaned and polished it a bit :o)

[Skippernick]

RODE IT, the first time for 5 months apart from MOT.
IAM ride out tomorrow,  :woot

[stinch182]

Went to castle combe and did the bikesafe with the police was a brilliant day and had a play on track too

[Gary]

Put new Brembo pads in. Took off the touring screen and put the standard one back in till the DB one arrives.

[unfazed]

Polished the 600 after washing it yesterday
Watched the world Superbike and world Supersport. 
Went for a short spin of around 100 miles. 
Forgot my camera so had to make do with the mobile phone camera :'(
Now back to watch the Moto2 and MotoGP

[Mark YPVS]

Ordered pair of tyres, chain & Sprockets , fork seals, dust caps & oil for mine, fitted a lowered seat and a Viper end can to brothers Fazer 600, and started to strip down sons ZXR 400 forks but allen key broke in the fork  :eek :eek :eek

Mark

[esetest]

Managed to get out on the fazer for an hour late afternoon , past Chewvalley lake , Blagdon lake , up through Cheddar gorge , down through Burrington , back home along the A38 , needed that .

[Dead Eye]

A nice route that esetest - I often use the same one, especially the road through Blagdon (A368?)

[Millietant]

First off I got Liz's trail bike (Honda CRF 230 F) running and ready for it's MOT.


Then our next door neighbour knocked on the door and asked if my youngest wanted to go out for ride with him (neighbour has a 125 learner bike, just passed his CBT and needs some road practice). My niece was staying with us, so I decided to join them, with her on the back (on Liz's Fazer 1000) and youngest was on his FZS 600.


Because of the small bike, we stuck to some quiet back lanes around the Midlands (Coventry, over to Kettering, up to Leicester and return), stopped in for a cuppa at Leicester Airport - was good as it was busy with lots of small aircraft to watch from the Aero Club cafe - then back home.


We were out for just shy of 3 hours, lovely weather, lovely ride - niece thoroughly enjoyed the ride (cossetted in Liz's best Alpine Stars winter textile suit) - poor quality mobile phone pic below


[smg id=1844 type=preview align=center caption="image"]

[fireblake]

My bike passed it's MOT, no advisories.
Only downside is that i only rode it for 3865 miles last year. Must try harder


Mickey

[stevierst]

Got bored and decided to chop the screen down on the gen II. Not sure about the shape (needs squaring off), and the mirrors look even more stupid than before!

[Mark YPVS]

Left it in the garage and took the RD350N YPVS to work instead 
Mark